SJ-模具修补焊接机

SJ-模具修补焊接机

江苏赛聚智能科技有限公司一贯重视现代化科学管理,建立了完善的质量管理体系,全面按照ISO9001国际质量管理体系和严格按照国际标准组织生产是“赛聚激光”产品出厂质量的保证。

技术指标 TeChniCal index

型⅜∕Mode∣: SJ-WY200/300/400/500

额定电压/Rated voltage: 200V/ 380V

激光类型/LaSertype: 1064∩m

输岀功率/〇IJtPUt Power: 200W/300W/400W/500W

光点调节范围/Light SPot adjustment range: 0.1 -0.3mm

光点大d√Light SPotSize: 0.2-3mm

激光输岀焦距/LaSer OUtPUtfoCal length; 80mm∕100mm∕120mm

脉S/Pulse width: ≤20ms

脉冲频率/PUlSefreqUency: ≤50Hz

冷却方!C∕Cooli∩g method:水冷

观察系SEZObservationsystem: CCD显微镜视觉系统(可随意移动)

保护气体/PrOteCtiVegas: 1路(氣气)

焊丝直S/Welding Wire diameter: 〇,Imm-0.8mm

产品特色 FeatUreS

1、 本产品提供了不同激光脉冲波形设置,针对钢材、铝材、 铜材等,可选用不同波形的激光加工参数,提升激光焊接的 熔透性和冷却时间对材料的硬度影响可控性。对预设的波形 存档,让初学者也能方便操作。
2、 本产品的系统提供了多达50组波形参数存储。由于模具 激光烧焊时随时会焊接不同材料,系统参数可随时调取使 用,无需重新编辑波形,方便快捷。
3、 本产品提供了液晶护眼光阀,可针对不同的脉宽,设置不 同的挡光时间,保护操作エ的眼睛不受激光的刺激。
4、 本产品可设置激光关闭后的氯气延时关闭时间。在大功率 焊接作业中,这个功能可以使焊接位置在冷却过程中始终受 到氣气的保护,始终保持金属原色,大幅提升大功率激光焊 接的质量。
1. ThiS ProdUCt PrOVkfeS different IaSeC PUlSe WaVefonn settings. FOr steel, aluminum, copper, etc., different IaSer PrOCeSSing ParameterS Can be SeIeCted to ImProVe the COntrOllabiIity Of the IaSer WeIding Penetration and COoling time On the hardness Of the material. ArChiVe PreSet WaVefOrmS So that beginners Can easily operate.
2. The SyStem Of this ProdUCt PrOVideS UP to 50 SetS Of WaVefOrm Parameter storage. SInce the IaSer Welding Of the mold WiII Weld different materials at any time, the SyStem ParameterS Can be retrieved and USed at any time, WithoUt re-editing the waveform, WhiCh is COnVenient and fast.
3. ThiS PrOduCt PrOVideS a IiqUid CryStal eye protection Iight valve, WhiCh Can Set different Iight blocking time for different PUlSe WtdthS to PrOteCt the operator's eyes from IaSer stimulation.
4. ThiS PrOdUCt Can be SettO delay the ShUtdoWn time Of argon after the IaSer is turned off. In high-power Welding OPerations, this function Can make the WeWing POSition always PrOteCted by argon gas during the c∞li∩g pro∞ss, always maintaining tħe Original COtor Of tħe metal, and greatIy improve the quality Of high-power IaSer welding.